65More on PlaybackViewing Pictures on a ComputerUsing the UC-E6 USB cable and PictureProject software provided with yourcamera, you can transfer photographs and movies to a computer and viewthem. Before pictures can be transferred (copied) to your computer, Picture-Project must be installed. For information on installing PictureProject, see theQuick Start Guide and the PictureProject Reference Manual (on CD).Setting the USB Option on the CameraBefore connecting the camera to a computer, set the USB option accordingto the method for transfer.Pictures can be copied from the camera to the computer by:• Pressing the ( Transfer ) Button on the camera• Clicking the Transfer button in PictureProjectWhich method you will use depends on your computer’soperating system and the USB option selected in the Set-upmenu of the camera. Set the USB option by referring to thetable ( 65) and the procedure ( 66) .* The camera ( Transfer ) Button can not be used when the memory cardwrite protect switch is in the lock position.Slide the switch to “write” position when transferring pictures ( 13).**Pictures stored in the memory cannot be transferred with the camera(Transfer ) Button. Use the Transfer button in PictureProject, or copy thepictures in the memory to the memory card ( 113) and then transfer the pic-tures to the computer.Operating systemPictures transferred using:Camera (Trans-fer ) Button*PictureProjectTransfer buttonWindows XP Home EditionWindows XP ProfessionalChoose Mass storageor PTP.Choose Mass storageor PTP.Windows 2000 ProfessionalWindows Millennium Edition (Me)Windows 98 Second Edition (SE)ChooseMass storage**. Choose Mass storage.Mac OS X (10.1.5 or later) Choose PTP. Choose Mass storageor PTP.(Transfer) Button