68More on PlaybackTransferring PicturesWhen the PictureProject Transfer is displayed in the computer monitor, press-ing the (Transfer ) Button on the camera or clicking the Transfer buttonin PictureProject will transfer pictures to the computer. For information on us-ing PictureProject, see the Quick Start Guide or the PictureProject ReferenceManual (on CD).To Transfer Pictures Using (Transfer ) ButtonWhen the PictureProject Transfer is displayed in the computer moni-tor, press the (Transfer ) Button on the camera.Pictures marked with an icon ( 110, 133) will be transferred.When the (Transfer ) Button is pressed, the transfer will startand the following messages will be displayed in the camera monitor.During TransferWhile transfer is in progress, do not:• Disconnect the USB cable• Turn the camera off• Remove the battery or the memory card• Disconnect the AC adapter kitFailure to observe this precaution could interfere with normal functioning of both thecamera and the computer.Transferring Pictures Stored in the Memory• Remove the memory card from the camera before connecting the camera to the computer.• When transferring pictures with the camera (Transfer ) Button, note the following.– For Windows XP or Mac OS X (10.1.5 or later), set the USB option in the Set-up menu to PTP.– For Windows 2000, Windows Me or Windows 98SE, the camera (Transfer ) Buttoncannot be used. Use the Transfer button in PictureProject, or copy the pictures in the memoryto the memory card ( 113) and then transfer the pictures to the computer.Using Mac OS X (10.1.5 or Later)Before using the (Transfer ) Button on the camera to transfer pictures, set theUSB option in the Set-up menu to PTP. When the USB option is set to Mass Storage,the pictures can not be transferred.PREPARING TO TRANSFER TRANSFERRING IMAGESTO COMPUTERTRANSFER COMPLETED