67More on PlaybackConnecting the USB CableTurn the computer on and wait for it to start up. After confirming that thecamera is off, connect the UC-E6 USB cable (provided with your camera) asshown below. Check to be sure the connector is in the correct orienta-tion and insert the plug straight. Do not insert or disconnect it forc-ibly. Connect the camera directly to the computer; do not connect the cablevia a USB hub or keyboard.You can now turn the camera on. The lens will extend when the camera isturned on.Windows 2000 Professional, Windows Millennium Edition (Me),Windows 98 Second Edition (SE)Do not select PTP when connecting the camera to a computer running one of theabove operating systems. If you have connected the camera to a computer running oneof the above operating systems with PTP selected in USB, disconnect the camera asdescribed below. Be sure to select Mass storage before reconnecting the camera.Windows 2000 ProfessionalA dialog will be displayed welcoming you to the Found New Hardware Wizard. ClickCancel to close the dialog, and then disconnect the camera.Windows Millennium Edition (Me)After displaying a message stating that the hardware information database is being up-dated, the computer will start the Add New Hardware Wizard. Click Cancel to exit thewizard, and then disconnect the camera.Windows 98 Second Edition (SE)The Add New Hardware Wizard will be displayed. Click Cancel to exit the wizard, andthen disconnect the camera.UC-E6 USB cable
