136Setup MenuBasic Camera SetupSound SettingsAdjust the following sound settings.Auto OffWhen the camera is on and a specified period of time passes with no operationsperformed, the monitor turns off and the camera will enter standby mode (A 17)to save power. Once the camera has entered standby mode, the power-on lampwill blink, and if no operations are performed for another three minutes, thecamera will turn off.Choose the time allowed to elapse before the camera enters standby mode if nooperations are performed from 30 s, 1 min (default setting), 5 min, and 30 min.C Canceling Standby ModeCancel standby mode and reactivate the monitor by pressing any of the following buttons.• the power switch• the shutter-release button• the A button• the c buttonD Note on Auto OffThe time allowed to elapse before the camera enters standby mode is fixed in the followingsituations:• When a menu is displayed: three minutes• During slide show playback: up to 30 minutes• When the AC adapter EH-62G is connected: 30 minutesd button M z (Setup menu) (A 126) M Sound settingsButton soundSelect On (default setting) or Off.When On is selected, a beep will sound once when operations are completedsuccessfully, twice when the camera acquires focus on the subject, and three timeswhen an error is detected. Start-up sound will also play when the camera is turned on.Shutter soundSelect On (default setting) or Off.No sound is played with shutter release when some features such as continuousshooting or BSS (best shot selector) are enabled, or when recording movies, even ifOn is selected.d button M z (Setup menu) (A 126) M Auto off
