62 Menu Guide3 Start shooting.Highlight Start and press J. The firstseries of shots will be taken at thespecified starting time, or after about3 s if Now was selected for Startoptions in Step 2. Shooting willcontinue at the selected interval untilall shots have been taken.A During ShootingDuring interval timer photography, thememory card access lamp will flash.Immediately before the next shootinginterval begins, the shutter speed displaywill show the number of intervals remaining,and the aperture display will show thenumber of shots remaining in the currentinterval. At other times, the number ofintervals remaining and the number of shotsin each interval can be viewed by pressingthe shutter-release button halfway (once the button is released, theshutter speed and aperture will be displayed until the standby timerexpires).Settings can be adjusted, the menus used, and pictures played backwhile interval timer photography is in progress. The monitor will turnoff automatically about four seconds before each interval. Note thatchanging camera settings while the interval timer is active may causeshooting to end.A Release ModeRegardless of the release mode selected, the camera will take thespecified number of shots at each interval.Memory cardaccess lamp
