71Menu GuideReduce “noise” (randomly-spaced bright pixels) in moviesrecorded at high ISO sensitivities (0 45).Reduce flicker and banding when shooting under fluorescent ormercury-vapor lighting during live view or movie recording.Choose Auto to allow the camera to automatically choose thecorrect frequency, or manually match the frequency to that ofthe local AC power supply.High ISO NRG button ➜ 1 movie shooting menuFlicker ReductionG button ➜ 1 movie shooting menuD Flicker Reduction in the Movie Shooting MenuIf Auto fails to produce the desired results and you are unsure as to thefrequency of the local power supply, test both the 50 and 60 Hz optionsand choose the one that produces the best results. Flicker reductionmay not produce the desired results if the subject is very bright, inwhich case you should try choosing a smaller aperture (higherf-number). To prevent flicker, select mode M and choose a shutter speedadapted to the frequency of the local power supply: 1/125 s, 1/60 s, or 1/30 sfor 60 Hz; 1/100 s, 1/50 s, or 1/25 s for 50 Hz.
