40 Reference: More on Photography (All Modes) / Using the Built-in FlashUsing the Built-in FlashThe camera supports a variety of flash modes for photographing poorly lit or backlit sub-jects.Using the Built-in Flash: , , , and Modes1 Rotate the mode dial to select the desired mode.2 Press the button and rotate until the desired flash mode is displayed in the controlpanel ( 41).3 Take pictures. The flash will pop up as required when the shutter-release button ispressed halfway, and fi re when a photograph is taken.Using the Built-in Flash: P, S, A, and M Modes1 Rotate the mode dial to select the desired mode.2 Press the button to raise the fl ash.3 Press the button and rotate until the desired flash mode is displayed in the controlpanel ( 41).4 Select a metering method and set exposure.5 Take pictures. The fl ash will fi re whenever a picture is taken.Lowering the Built-in FlashTo save power when the flash is not in use, press it gently down-ward until the latch clicks into place.
