372n1 IX-NIKKOR lenses can not be used.2 Vibration Reduction (VR) supported with VR lenses.3 Spot metering meters selected focus point (0 115).4 The camera’s exposure metering and flash control systems do not workproperly when shifting and/or tilting the lens, or when an aperture other thanthe maximum aperture is used.5 Can not be used with shifting or tilting.6 Manual exposure mode only.7 Can be used with AF-S and AF-I lenses only (0 373). For information on thefocus points available for autofocus and electronic rangefinding, see page 373.8 With maximum effective aperture of f/5.6 or faster.9 When focusing at minimum focus distance with AF 80–200mm f/2.8, AF 35–70mm f/2.8, AF 28–85mm f/3.5–4.5 , or AF 28–85mm f/3.5–4.5 lens atmaximum zoom, in-focus indicator may be displayed when image on mattescreen in viewfinder is not in focus. Adjust focus manually until image inviewfinder is in focus.10 With maximum aperture of f/5.6 or faster.11 Some lenses can not be used (see page 374).12 Range of rotation for AI 80–200mm f/2.8 ED tripod mount is limited by camera body.Filters can not be exchanged while AI 200–400mm f/4 ED is mounted on camera.13 If maximum aperture is specified using Non-CPU lens data (0 212), aperturevalue will be displayed in viewfinder and control panel.14 Can be used only if lens focal length and maximum aperture are specified usingNon-CPU lens data (0 212). Use spot or center-weighted metering if desiredresults are not achieved.15 For improved precision, specify lens focal length and maximum aperture usingNon-CPU lens data (0 212).16 Can be used in manual exposure modes at shutter speeds slower than flashsync speed by one step or more.17 Exposure determined by presetting lens aperture. In aperture-priority autoexposure mode, preset aperture using lens aperture ring before performing AElock and shifting lens. In manual exposure mode, preset aperture using lensaperture ring and determine exposure before shifting lens.18 Exposure compensation required when used with AI 28–85mm f/3.5–4.5, AI 35–105mm f/3.5–4.5, AI 35–135mm f/3.5–4.5, or AF-S 80–200mm f/2.8D. Seeteleconverter manual for details.19 Requires PK-12 or PK-13 auto extension ring. PB-6D may be requireddepending on camera orientation.20 Use preset aperture. In aperture-priority auto exposure mode, set aperture usingfocusing attachment before determining exposure and taking photograph.• PF-4 Reprocopy Outfit requires PA-4 Camera Holder.• Noise in the form of horizontal lines may appear in pictures taken with AF-S ZoomNikkor 24–85 mm f/3.5–4.5G (IF) lenses at ISO sensitivities over 6400; use manualfocus or focus lock.
