19INSTALLING BATTERIES1 Pull out and turn battery holderrelease knob as shown. 2 Remove battery holder MS-30.3 Install eight AA-type batteries withthe “+” and “–” terminals positionedas shown inside the holder.4 Return battery holder MS-30 tobattery chamber. 5 Turn battery holder release knobclockwise until it stops.• To install Ni-MH Battery Unit MN-30,follow steps 1-2 and 4-5.Before installing batteries:• Make sure the power switch is setat OFF position.• Use AA-type alkaline or lithiumbatteries, or optional Ni-MHBattery Unit MN-30 with the F5.• When installing/replacing batteries,always read “NOTES ON BATTER-IES”, page 154.CAUTION: When carrying the battery holder MS-30 removed from the camerabody, remove its batteries or install it in a case to avoid possible short-circuitcaused by contacts with other metal objects.P400 (E) 02.12.27 6:42 PM Page 19
