68FLEXIBLE PROGRAMTo change the shutter speed/aperture combination inProgrammed Auto exposure mode, use the Flexible Programfunction. Flexible Program lets you temporarily change an auto-matically set shutter speed/aperture combination in 1/3 EVsteps, while maintaining the same or consistent exposure.Flexible Program function can also be used with any NikonSpeedlight. Note that selectable shutter speeds are limited tothose below the sync speed of the Speedlight. When perform-ing flash photography, however, you cannot shift to a shutterspeed faster than 1/250 sec. (Changeable to 1/300 sec. withCustom Setting.)1 Make sure Programmed Auto exposure mode (¡) isselected, and lightly press the shutter release button.Shutter speed and aperture appear in the top LCD andviewfinder.P400 (E) 02.12.27 6:42 PM Page 68
