2322PREPARATIONSet Date and Time (F65D only)4This camera allows you to imprint Year/Month/Day, Day/Hour/Minute (24-hour clock), Month/Day/Year or Day/Month/Year on your picture in anyexposure mode. (For imprinting date/time, see page 39.)1 Push MODE button to select one of thedate or time displays. Push SELECTbutton so section to be corrected startsblinking.• Date cannot be set in Day/Hour/Minute display. Toset date, select Year/Month/Day, Month/Day/Year orDay/Month/Year.• Set the time in Day/Hour/Minute display.• Adjusting date and time (Example: year 2001, January 15)2 Push ADJUST button to change theblinking numbers and after correction,push SELECT button until the numbersstop blinking.• Each time you push the ADJUST button, year sectionmoves up from 98 to 49 (back to 98 after 49).• To change the numerical indication rapidly, hold theADJUST button down for more than 1 sec.• Push SELECT button until the date/time displaystops blinking. When the imprint indicator —appears in the data imprint LCD panel, the settingis complete.NOTE: Battery requirements for imprintingImprinting of date/time requires one CR2025 3V lithium battery separate from thebatteries required for the camera body. Battery life is approx. 3 years. When theimprinting on the photo appears faded and/or the display of the data imprint onthe LCD becomes faint or disappears, this indicates low battery power. Replacethe battery (making sure to set correct date/time after changing battery).1 Open camera back, remove the batterychamber cover for imprinting and thenremove the used battery.• Use a pointed object to remove the battery.• Changing battery for imprinting2 Insert a new CR2025 3V lithium batterywith ´ side facing up. Attach the batterychamber cover.NOTE: Storing batteriesKeep the batteries out of children’s reach. If swallowed, contact a doctorimmediately. (For “Notes on Batteries”, see page 98.)F65 (E) 02.12.27 5:43 PM Page 22