25Connect the Power CableBefore connecting the power cables, be sure the scanner is off. Attach the female end of thepower cable to the AC connector on the rear of the scanner and insert the male end into ageneral-purpose (AC 100–240 V, 50/60 Hz) household outlet.Power onPower off○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ImportantIf you are using a computer with a 4-pin DV connector (such as SONY VAIO laptop computers),you will need to purchase a 6-pin–4-pin cable or 6-pin–4-pin adapter.Scanner ComputerIEEE 1394 connectorAlign the curved portion ofthe connector (circled) withthe matching portion of theconnector on the scanner orcomputer.Connecting the Interface CableAfter confirming that the scanner is off, connect one end of the supplied 6-pin–6-pin IEEE1394 cable to the scanner, the other to the computer.Connect the cable as shown. Attempting to insert the connector in another orientation could notonly damage the connector, but also damage the scanner or computer or interfere with theircorrect functioning.Connecting the ScannerThe first time the scanner is connected to a Windows computer, the Device Manager will installthe device drivers needed to “register” the scanner with the system (more information ondevice registration is available on page 27 of this manual).
