60Step 3—Insert the HolderAfter confirming that the status LED is glowing steadily, slide a holder into the holder slot asshown below, with the insertion guide up and pointing toward the scanner. Do not insert theholder at an angle. Once the holder has been inserted as far as the insertion guide, the scanner’sloading mechanism will be activated and the holder will be fed into the scanner automatically.Remove your hands from the holder when loading starts. Loading will stop when the holder isin scanning position.Insertion guideInserting HoldersHolders can not be inserted into the scanner if the sliding cover is not fully open.When inserting holders in the scanner, do not use force. When a holder is inserted, the scannerreadies the loading mechanism. Removing the holder or otherwise interfering with loading cancause scanning errors. Do not attempt to forcibly remove the holder during or after loading.When ejecting the holder, always use the button on the front of the scanner or the eject buttonin the Nikon Scan scan window.If the holder does not load automatically when inserted, remove the holder and try again. Beforeinsertion, remove any dust or lint with a blower.
