Nilfisk-Advance SR1800C B-D User Manual

Contents

Nilfisk-Advance SR1800C B-D User Manual Manual pdf 60 page image

USER MANUAL10 33014817(2)2006-06 AWithout headlights(See Fig. J)1. Main broom control lever2. Hopper control lever3. Skirt control lever4. Accelerator lever5. Parking brake lever6. Ignition switch7. Horn switch8. Hopper overheating buzzer (optional)9. Fan control lever10. Filter shaker switch11. Brake pedal12. Drive pedal13. Warning light instrument panel13a. Glow plug warning light13b. Fuel warning light13c. Battery charge indicator light13d. Oil pressure warning light13e. Coolant temperature warning light13f. Engaged parking brake warning light13g. High beam indicator light13h. Running light indicator light13i. Clogged air cleaner warning light13j. Turn signal indicator light13k. Hour counter14. Fuse box B15. Fuse box A16. Optional switch17. Side broom control leverSR 1800C BWith headlights(See Fig. K)1. Main broom control lever2. Hopper control lever3. Skirt control lever4. Battery plug5. Parking brake lever6. Ignition switch7. Warning switch8. Combination switch9. Fan control lever10. Filter shaker switch11. Brake pedal12. Drive pedal13. Warning light instrument panel14. Fuse box B15. Fuse box A16. Optional switch17. Side broom control lever18. Hopper overheating buzzer (optional)Without headlights(See Fig. L)1. Main broom control lever2. Hopper control lever3. Skirt control lever4. Battery plug5. Parking brake lever6. Ignition switch7. Horn switch8. Hopper overheating buzzer (optional)9. Fan control lever10. Filter shaker switch11. Brake pedal12. Drive pedal13. Warning light instrument panel14. Fuse box B15. Fuse box A16. Optional switch17. Side broom control leverControls and leversThe control levers are used for the following functions:– Side broom lifting;– Hopper lowering;– Hopper lifting;– Side broom lowering;– Skirt opening;– Skirt closing;– Main broom lowering;– Main broom lifting.INSTRUCTIONS FOR USEStart (SR 1800C D)– Before starting the machine, make sure the parkingbrake (5, Fig. I) is engaged.– Insert the ignition key in the ignition switch.– Turn the accelerator lever (4, Fig. I) to idle.– Turn the ignition key clockwise to the first position.Battery charge and oil pressure warning lights should beon.– The glow-plug pre-heating warning light goes off: Turnthe ignition key clockwise until the end of stroke. Whenthe motor is on, release the ignition key which willautomatically return to the first position.NOTEMachines with the EC marking are providedwith safety devices should the operator leavethe driver’s seat.The machine cannot be started unless theoperator is sitting in position.NOTEBefore trying to start the machine again, turnthe ignition key back to “0” position.As soon as the machine has been started,check the battery charge, oil pressure andpre-heating warning lights are off.