Contents - Table Of Contents
- Table Of Contents
- Table Of Contents
- GENERAL INFORMATION
- SAFETY
- TECHNICAL DATA (For BA 451, BA 451D, BA 531, BA 531D)
- DIMENSIONS CA 551
- MAINTENANCE
- MACHINE NOMENCLATURE (For BA 451, BA 451D, BA 531, BA 531D)
- MACHINE NOMENCLATURE (For BA 551, BA 551D, BA 551CD, BA 611D)
- MACHINE NOMENCLATURE (For CA 451, CA 531)
- MACHINE NOMENCLATURE (For CA 551)
- SOLUTION/CLEAN WATER SUPPLY SYSTEM
- SOLUTION FILTER CLEANING (For BA 551, BA 551D, BA 551CD, BA 611D, CA
- SOLENOID VALVE DISASSEMBLY/ASSEMBLY (For BA 451, BA 451D, BA
- SOLENOID VALVE DISASSEMBLY/ASSEMBLY (For BA 551, BA 551D, BA 551CD BA 611D, CA 551)
- TROUBLESHOOTING
- ECOFLEX™ SYSTEM
- CLEAN WATER FILTER CLEANING (For BA 551D, BA 551CD, BA 611D)
- DETERGENT TANK CLEANING (For BA 451D, BA 531D, BA 551D, BA 551CD, BA 611D)
- ECOFLEX™ SYSTEM DRAINING (For BA 451D, BA 531D, BA 551D, BA 551CD, BA 611D)
- WATER PUMP DISASSEMBLY/ASSEMBLY (For BA 451D, BA 531D, BA 551D, BA 551CD, BA 611D)
- DETERGENT PUMP AND CHECK VALVE DISASSEMBLY/ASSEMBLY (For BA 451D, BA 531D)
- DETERGENT PUMP AND CHECK VALVE DISASSEMBLY/ASSEMBLY (For BA 551D BA 551CD, BA 611D)
- BRUSHING SYSTEM
- BRUSH/PAD-HOLDER DECK DISASSEMBLY/ASSEMBLY (For CA 451, CA 531, CA 551)
- BRUSH MOTOR ELECTRICAL INPUT CHECK (For BA 451, BA 451D, BA 531, BA 531D)
- BRUSH MOTOR ELECTRICAL INPUT CHECK (For BA 551, BA 551D)
- BRUSH MOTOR ELECTRICAL INPUT CHECK (For BA 551CD)
- BRUSH MOTOR ELECTRICAL INPUT CHECK (For BA 611D)
- BRUSH MOTOR ELECTRICAL INPUT CHECK (For CA 451, CA 531, CA 551)
- BRUSH MOTOR CARBON BRUSH CHECK/REPLACEMENT (For BA 551, BA 551D)
- BRUSH MOTOR CARBON BRUSH CHECK/REPLACEMENT (For BA 551CD)
- BRUSH MOTOR CARBON BRUSH CHECK/REPLACEMENT (For BA 611D)
- BRUSH MOTOR DISASSEMBLY/ASSEMBLY (For BA 551CD)
- BRUSH MOTOR DISASSEMBLY/ASSEMBLY (For BA 611D)
- BRUSH MOTOR DISASSEMBLY/ASSEMBLY (For CA 451, CA 531, CA 551)
- CHECK/REPLACEMENT/ADJUSTMENT OF DRIVING BELTS FROM MOTORS TO CYLINDRICAL BRUSHES (For BA 551CD)
- RECOVERY WATER SYSTEM
- SQUEEGEE CLEANING/CHECK/REPLACEMENT AND SQUEEGEE BLADE REPLACEMENT (All models)
- VACUUM SYSTEM MOTOR FILTER CLEANING (All models)
- VACUUM SYSTEM MOTOR ELECTRICAL INPUT CHECK (For CA 451, CA 531, CA 551)
- VACUUM SYSTEM MOTOR CARBON BRUSH CHECK/REPLACEMENT (All models)
- VACUUM SYSTEM MOTOR DISASSEMBLY/ASSEMBLY (All models)
- SQUEEGEE SPRING CHECK/REPLACEMENT (All models, with aluminium squeegee)
- DRIVE SYSTEM
- DRIVE SYSTEM ELECTRONIC BOARD DIAGNOSTIC TABLE
- OTHER SYSTEMS
- ELECTRICAL SYSTEM
- BATTERY DISASSEMBLY/ASSEMBLY (For BA 451, BA 451D; BA 531, BA 531D BA 551, BA 551D, BA 551CD, BA 611D)
- BATTERY TYPE SETTING (WET OR GEL) (For BA 451, BA 531, BA 551)
- BATTERY TYPE SETTING (WET OR GEL) (For BA 451D, BA 531D, BA 551D BA 551CD, BA 611D)
- FUSE CHECK/REPLACEMENT (For BA 451, BA 451D, BA 531, BA 531D, BA
- FUSE CHECK/REPLACEMENT (For CA 431, CA 531, CA 551)
- COMPONENT LAYOUT (For BA 451, BA 531, BA 551)
- WIRING DIAGRAM (For BA 451, BA 531, BA 551)
- COMPONENT LAYOUT (For BA 451D, BA 531D, BA 551D, BA 551CD, BA 611D)
- WIRING DIAGRAM (For BA 451D, BA 531D, BA 551D, BA 551CD, BA 611D)
- COMPONENT LAYOUT (For CA 451, CA 531, CA 551)
- WIRING DIAGRAM (For CA 451, CA 531, CA 551)
| 
ECOFLEX™ SYSTEMSERVICE MANUAL ENGLISHBA 451 / BA 451D / BA 531 / BA 531D / BA 551 / BA 551D / BA 551CD / BA 611DCA 451 / CA 531 / CA 551 909 6756 000(5)2010-03 37ECOFLEX™ SYSTEM DRAINING (For BA 451D, BA 531D, BA 551D, BA 551CD, BA 611D)Clean the detergent tank, then remove the detergent remained in the hoses and in the pump.1.Grasp the handle (41) and carefully lower the tank (40).2.Turn on the machine by turning the ignition key (80) to “I”.3.Turn on the EcoFlex™ system by pressing the switch (77). Check that the switch warning led (78) turns on.4.Press the switches (77) and (82a) at the same time, until the switch warning led (78) starts flashing (after about 5 seconds).5.Release the switches and wait for the warning led (78) to stop flashing and for the vacuum system to turn on.6.Collect the detergent remained on the floor.7.Turn the ignition key (80) to “0”.8.Grasp the handle (41) and carefully lift the tank (40), then check that the hose (48) is empty, otherwise perform steps 3 to 99.again.NOTE:The draining cycle lasts about 30 seconds, then the vacuum function automatically turns on, which allows to remove thedetergent remained.The draining cycle can also be performed with the detergent tank (45) full of water, thus cleaning the system thoroughly.It is advisable to perform the draining cycle when the EcoFlex™ system is really dirty/encrusted because the machinehas not been used/cleaned for a long time.The draining cycle can be performed also to quickly fill the detergent supply hose when the tank (45) is full but thesystem is still empty.If necessary, the draining cycle can be repeatedly performed. |
