Contents - Table Of Contents
- Table Of Contents
- Table Of Contents
- GENERAL INFORMATION
- SAFETY
- TECHNICAL DATA (For BA 451, BA 451D, BA 531, BA 531D)
- DIMENSIONS CA 551
- MAINTENANCE
- MACHINE NOMENCLATURE (For BA 451, BA 451D, BA 531, BA 531D)
- MACHINE NOMENCLATURE (For BA 551, BA 551D, BA 551CD, BA 611D)
- MACHINE NOMENCLATURE (For CA 451, CA 531)
- MACHINE NOMENCLATURE (For CA 551)
- SOLUTION/CLEAN WATER SUPPLY SYSTEM
- SOLUTION FILTER CLEANING (For BA 551, BA 551D, BA 551CD, BA 611D, CA
- SOLENOID VALVE DISASSEMBLY/ASSEMBLY (For BA 451, BA 451D, BA
- SOLENOID VALVE DISASSEMBLY/ASSEMBLY (For BA 551, BA 551D, BA 551CD BA 611D, CA 551)
- TROUBLESHOOTING
- ECOFLEX™ SYSTEM
- CLEAN WATER FILTER CLEANING (For BA 551D, BA 551CD, BA 611D)
- DETERGENT TANK CLEANING (For BA 451D, BA 531D, BA 551D, BA 551CD, BA 611D)
- ECOFLEX™ SYSTEM DRAINING (For BA 451D, BA 531D, BA 551D, BA 551CD, BA 611D)
- WATER PUMP DISASSEMBLY/ASSEMBLY (For BA 451D, BA 531D, BA 551D, BA 551CD, BA 611D)
- DETERGENT PUMP AND CHECK VALVE DISASSEMBLY/ASSEMBLY (For BA 451D, BA 531D)
- DETERGENT PUMP AND CHECK VALVE DISASSEMBLY/ASSEMBLY (For BA 551D BA 551CD, BA 611D)
- BRUSHING SYSTEM
- BRUSH/PAD-HOLDER DECK DISASSEMBLY/ASSEMBLY (For CA 451, CA 531, CA 551)
- BRUSH MOTOR ELECTRICAL INPUT CHECK (For BA 451, BA 451D, BA 531, BA 531D)
- BRUSH MOTOR ELECTRICAL INPUT CHECK (For BA 551, BA 551D)
- BRUSH MOTOR ELECTRICAL INPUT CHECK (For BA 551CD)
- BRUSH MOTOR ELECTRICAL INPUT CHECK (For BA 611D)
- BRUSH MOTOR ELECTRICAL INPUT CHECK (For CA 451, CA 531, CA 551)
- BRUSH MOTOR CARBON BRUSH CHECK/REPLACEMENT (For BA 551, BA 551D)
- BRUSH MOTOR CARBON BRUSH CHECK/REPLACEMENT (For BA 551CD)
- BRUSH MOTOR CARBON BRUSH CHECK/REPLACEMENT (For BA 611D)
- BRUSH MOTOR DISASSEMBLY/ASSEMBLY (For BA 551CD)
- BRUSH MOTOR DISASSEMBLY/ASSEMBLY (For BA 611D)
- BRUSH MOTOR DISASSEMBLY/ASSEMBLY (For CA 451, CA 531, CA 551)
- CHECK/REPLACEMENT/ADJUSTMENT OF DRIVING BELTS FROM MOTORS TO CYLINDRICAL BRUSHES (For BA 551CD)
- RECOVERY WATER SYSTEM
- SQUEEGEE CLEANING/CHECK/REPLACEMENT AND SQUEEGEE BLADE REPLACEMENT (All models)
- VACUUM SYSTEM MOTOR FILTER CLEANING (All models)
- VACUUM SYSTEM MOTOR ELECTRICAL INPUT CHECK (For CA 451, CA 531, CA 551)
- VACUUM SYSTEM MOTOR CARBON BRUSH CHECK/REPLACEMENT (All models)
- VACUUM SYSTEM MOTOR DISASSEMBLY/ASSEMBLY (All models)
- SQUEEGEE SPRING CHECK/REPLACEMENT (All models, with aluminium squeegee)
- DRIVE SYSTEM
- DRIVE SYSTEM ELECTRONIC BOARD DIAGNOSTIC TABLE
- OTHER SYSTEMS
- ELECTRICAL SYSTEM
- BATTERY DISASSEMBLY/ASSEMBLY (For BA 451, BA 451D; BA 531, BA 531D BA 551, BA 551D, BA 551CD, BA 611D)
- BATTERY TYPE SETTING (WET OR GEL) (For BA 451, BA 531, BA 551)
- BATTERY TYPE SETTING (WET OR GEL) (For BA 451D, BA 531D, BA 551D BA 551CD, BA 611D)
- FUSE CHECK/REPLACEMENT (For BA 451, BA 451D, BA 531, BA 531D, BA
- FUSE CHECK/REPLACEMENT (For CA 431, CA 531, CA 551)
- COMPONENT LAYOUT (For BA 451, BA 531, BA 551)
- WIRING DIAGRAM (For BA 451, BA 531, BA 551)
- COMPONENT LAYOUT (For BA 451D, BA 531D, BA 551D, BA 551CD, BA 611D)
- WIRING DIAGRAM (For BA 451D, BA 531D, BA 551D, BA 551CD, BA 611D)
- COMPONENT LAYOUT (For CA 451, CA 531, CA 551)
- WIRING DIAGRAM (For CA 451, CA 531, CA 551)
| 
BRUSHING SYSTEMSERVICE MANUAL ENGLISHBA 451 / BA 451D / BA 531 / BA 531D / BA 551 / BA 551D / BA 551CD / BA 611DCA 451 / CA 531 / CA 551 909 6756 000(5)2010-03 47BRUSH/PAD-HOLDER DECK DISASSEMBLY/ASSEMBLY (For CA 451, CA 531, CA 551)DisassemblyDrive the machine to the appointed disposal area, and empty the recovery water tank (21) with the hose (16).Remove the brush/pad-holder, as shown in the User Manual.1.Place the machine on a hoisting system (if available).2.Otherwise, drive the machine on a level floor.3.Disconnect the power supply cable (59) from the electrical mains.4.Open the recovery water tank cover (22).5.Remove the retaining plate (61) of the tank (40).6.Grasp the handle (41) and carefully lift the tank (40).7.If the power supply cable (59) is on the holder (60), remove it.8.Move aside the recovery water drain hose (16).9.Remove the screws (A) and carefully move the panel (B).10.Disconnect the brush motor wiring harness connections (C) from the electronic board (D) (connections symbols: “F4” and11.“F5”).Open the brush motor wiring harness clamps (E).12.Open the brush motor wiring harness clamps (F).13.Lower the deck by pressing the pedal (11).14.Disconnect the solution hose connection (G).15.Remove the screws (H) and (P), then remove the brush/pad-holder deck (I) with the relevant motor and wiring harness.16.AssemblyAssemble the components in the reverse order of disassembly, and note the following:17.When installing the deck (I) on the machine, use the handwheel (Q) to centre the screw hole (P).•WARNING!When the maintenance/repair procedure is completed, the tank (40) must always be locked with the plate (61).NOTE:Figure showing CA 451. |
