Nilfisk-Advance ecoflex SC7000 Instructions For Use Manual

Also see for 56509003: Service manual Instructions for use

ENGLISH / A-3FORM NO. 56041980 - CS7000 - A-3PARTS AND SERVICERepairs, when required, should be performed by your Authorized Nilfisk Service Center, who employs factory trained service personnel, andmaintains an inventory of Nilfisk original replacement parts and accessories.Call the Nilfisk Authorized Service named below for repairs or service. Please specify the Model and Serial Number when discussing yourmachine.(Dealer, affix service sticker here.)NAMEPLATEThe Model Number and Serial Number of your machine are shown on the Nameplate. One nameplate is located on the wall of the operator’scompartment just below the circuit breaker decal. The second nameplate is located on the chassis beneath the recovery tank. This information isneeded when ordering repair parts for the machine. Use the space below to note the Model Number and Serial Number of your machine for futurereference.MODEL ________________________________________________SERIAL NUMBER ________________________________________DATE CODE ____________________________________________Note: Reference the separately supplied engine manufacture’s maintenance and operator manual for more detailed engine specification andservice data.UN-CRATINGUpon delivery, carefully inspect the shipping crate and the machine for damage. If damage is evident, save all parts of the shipping crate so thatthey can be inspected by the trucking company that delivered the machine. Contact the trucking company immediately to file a freight damageclaim.1 After removing the crate, remove the wooden blocks next to the wheels.2 Check the engine oil and coolant levels.3 Check the hydraulic oil level.4 Read the instructions in the Preparing the Machine For Use section of this manual, then fill the fuel tank.5 Place a ramp next to the front end of the pallet.6 Read the instructions in the Operating Controls and Operating the Machine sections of this manual and start the engine. Slowly drive themachine forward down the ramp to the floor. Keep your foot lightly on the brake pedal until the machine is off the pallet.CAUTION!• Use extreme CAUTION when operating this machine. Be certain that you are thoroughly familiar with all operating instructionsbefore using this machine. If you have any questions, contact your supervisor or your local Nilfisk Industrial Dealer.• If the machine malfunctions, do not try to correct the problem unless your supervisor directs you to do so. Have a qualifiedcompany mechanic or an authorized Nilfisk Dealer service person make any necessary corrections to the equipment.• Use extreme care when working on this machine. Loose clothing, long hair, and jewelry can get caught in moving parts. Turn theKey Ignition Switch OFF and remove the key before servicing the machine. Apply the parking brake before getting off of the machine.Use good common sense, practice good safety habits and pay attention to the yellow decals on this machine.• Drive the machine slowly on inclines. Use the Brake Pedal (38) to control machine speed while descending inclines. DO NOT turnthe machine on an incline; drive straight up or down.• The maximum rated incline for sweeping and scrubbing is 17.6% (10°). The maximum rated incline during transport is 21% (12°).MODIFICATIONSModifications and additions to the cleaning machine which affect capacity and safe operation shall not be performed by the customer or userwithout prior written approval from Nilfisk Inc. Unapproved modifications will void the machine warranty and make the customer liable for anyresulting accidents.revised 8/2015