2-3Installing the Main Equipment (Wall Mounting)The Main Equipment should be installed in a clean, dry, centrally-located spot (such as a closet), where itis out of direct sunlight. The area should be free of moisture (water, dampness, etc.), and away from anyequipment which might vibrate. You should choose a location that is well-ventilated, where thetemperature does not exceed that of a normal room.Step 1: Before wall mounting the TX-Z 2 824 Main Equipment, the top cover of Main Equipment must beremoved. Loosen the two screws and remove the top cover as illustration.Step 2: Tack-fasten two of the four wood screws (provided with Main Equipment) on the wall at about320 mm apart.STEP 1 Top Cover39932035028.5235292
