Trunk Outgoing Call 3-8 To cancel Dial Block:1. Press SPK key.2. Press ICM key. (See Note 1)3. Dial ∗, #.4. Dial 4-digit code which is entered when setting Dial Block.5. Dial #.- Confirmation tone when effective.- Error tone when not effective.6. Press SPK key.1. Lift handset.2. Dial function code. (See Note 2)3. Dial 4-digit personal code which is entered when setting Dial Block.4. Replace handset.Note 1: If Program #075-Item4 is 0 (No tone), skip Step 2.Note 2:Program #020-Item4 Data Automatic Trunk Access Code for SLT Dial at Step 20 0 9561 9 056RELATED SYSTEM DATA:#035-Item3: Toll Restriction Class (Dial Block)!!!! FlashDESCRIPTION:The flashing time can be set by system program (#026) to two different timings for CO lines and PBXlines. To send a flashing signal, just depress the FLASH key after seizing a CO/PBX line.STATION APPLICATION:KTS, SLTOPERATION:1. On the CO/PBX line2. Press FLASH key.(On the CO/PBX line)1. Flash Hookswitch.2. Dial 90.RELATED SYSTEM DATA:#026: Flash Timer!!!! Pulse to Tone ConversionDESCRIPTION:Pulse to Tone Conversion allows you to change from Pulse to Tone dialing mode to access servicessuch as computer-accessed long distance service.STATION APPLICATION:KTS
