Trunk Outgoing Call 3-10 OPERATION:To activate Key Touch Tone:- Do not lift handset.1. Dial ∗.To cancel Key Touch Tone:- Do not lift handset.1. Dial ∗. Final Key Touch Tone is heard.RELATED SYSTEM DATA:#013-Item1: Key Touch Tone!!!! Easy Trunk AccessDESCRIPTION:Easy Trunk Access lets an extension user access an outgoing line without pressing a Line key or dialinga two-digit line number. A single-digit code automatically accesses an outgoing outside line from smallernumber, large number, or rotated number.STATION APPLICATION:KTS, SLTOPERATION:To access the first available outgoing line:1. (On-Hook and Speaker off condition)2. Dial 0. A line is seized and dial tone comes over the speaker.1. Lift handset.2. Dial 9 or 0. (refer to Program #020-Item4)RELATED SYSTEM DATA:#015-Item3: Automatic Trunk Access#020-Item4: Automatic Trunk Access Code for SLT#064-Item3: Trunk Line Seizing Order Selection!!!! Queuing Group AccessDESCRIPTION:Queuing Group Access lets an extension user access the first available outgoing line in a Queuing Groupwithout pressing a Line key or dialing a two-digit line number. A single-digit code automatically accessesan outgoing outside line from small number, large number, or rotated number.STATION APPLICATION:KTS, SLTOPERATION:To access the first available line in a Queuing Group:1. Press SPK key.2. Press ICM key. (See Note)3. Dial Queuing Group number (1-6). A line is seized and dial tone comes over the speaker.
