Noblelift FE4P44-77N Series Operation And Maintenance Manual

Also see for FE4P16N: Operation and maintenance manual

Contents

Noblelift FE4P44-77N Series Operation And Maintenance Manual Manual pdf 65 page image

64·According to 《operation and maintenance manual》of the used charger to breakcharging procedure.·Do not pull out charger plug during charging, otherwise there will be spark take placeto lead to danger.(2) Replace betteryWhen forklift has been used continuously for a working period and the battery has entirelyexcharged,replace the battery with another fully charged one and charge the battery beenreplaced.·In replacing, to be sure that new battery mates with forklift well, otherwise there willbe dangerous to shorten lifespan of forklift or overturn during traveling.·Replacement of battery shall be done on level table.According to the steps as below to replace battery:·When using another forklift as hoisting equipment to lift battery, you shall choose aproper lifting tool(accessary).·Only qualified person can operate battery.(a) Pull out plug of battery.(b) Open upper cover of battery.Use gas spring or other methods to ensure block uppercover of battery to avoid cover fall down to injure human orbodywork.(c) When hoisting battery out forklift, be careful fortouching steering wheel or other forklift parts.(d) After finish installation of battery, connect and fastenthe battery pin.(e) Close upper cover of battery.· When close upper cover of battery, be careful to injureyour finger.·During hoisting battery, be careful to prevent swing ofbattery box to injure bodywork.10． Stacking·Check the following items before operation:(a) Be sure that there are no falling of load and damagingof load in loading region.(b) Be sure that there is no goods or pilepossible leading to unsafetyStack as follows:(1) Slow down when getting close to goods.(2) Parking in front of goods.(3) Check the safety of goods area.(4) Adjust the position of vehicle until it lies in front of goods(5) Make Mast vertically ,lift fork up more than the height of goods.(6) Check goods’location and park the vehicle to optimum position.(7) Ensure that the load higher than the stacked goods and lowerfork slowly and place load correctly and safely.·Before load placed on shelves or bracket:(a) Lower load until fork no longer carry any load.