Settings > Phone > Call > Image in videocall.Even if you denied video sending during a video call,the call is still charged as a video call. Check thepricing with your service provider.1. To start a video call, enter the phone number inthe standby mode, or select Contacts and acontact.2. Select Options > Call > Video call.The secondary camera on the front is used bydefault for video calls. Starting a video call maytake a while. Waiting for video image isshown. If the call is not successful (for example,video calls are not supported by the network, orthe receiving device is not compatible), you areasked if you want to try a normal call or send atext or multimedia message instead.The video call is active when you see two videoimages, and hear the sound through theloudspeaker. The call recipient may deny videosending ( ), in which case you only hear thesound and may see a still image or a greybackground graphic.3. To end the video call, press the end key.Options during a video callTo change between showing video or hearing onlysound, select Options > Enable, or Disable andthe desired option.To zoom your image in or out, scroll up or down.To route the audio to a compatible headset withBluetooth connectivity attached to your device,select Options > Activate handsfree. To route theaudio back to the loudspeaker of your device, selectOptions > Activate handset.To adjust the volume during a video call, use thevolume key on the side of the device.To use the main camera to send video, selectOptions > Use main camera. To switch back tothe secondary camera, select Options > Usesecondary camera.Answer or decline a videocallWhen a video call arrives, is displayed.To answer the video call, press the call key. Allowvideo image to be sent to caller? is displayed. Tostart sending live video image, select Yes.If you do not activate the video call, video sendingis not activated, and you only hear the sound of the119 Make calls
