Pair devicesTo pair with compatible devices and view yourpaired devices, in the main view of Bluetoothconnectivity, scroll right.Before pairing, create your own passcode (1 to 16digits), and agree with the owner of the otherdevice to use the same code. Devices that do nothave a user interface have a factory-set passcode.The passcode is used only once.1. To pair with a device, select Options > Newpaired device. Devices that are within range aredisplayed.2. Select the device, and enter the passcode. Thesame passcode must be entered on the otherdevice as well.3. Some audio enhancements connectautomatically to your device after pairing.Otherwise, scroll to the enhancement, and selectOptions > Connect to audio device.Paired devices are indicated by in the devicesearch.To set a device as authorised or unauthorised, scrollto the device, and select from the following options:● Set as authorised — Connections between yourdevice and the authorised device can be madewithout your knowledge. No separateacceptance or authorisation is needed. Use thisstatus for your own devices, such as yourcompatible headset or PC or devices that belongto someone you trust. indicates authoriseddevices in the paired devices view.● Set as unauthorised — Connection requestsfrom this device must be accepted separatelyevery time.To cancel a pairing, scroll to the device, and selectOptions > Delete.If you want to cancel all pairings, select Options >Delete all.Receive data using BluetoothconnectivityWhen you receive data through Bluetoothconnectivity, a tone sounds, and you are asked ifyou want to accept the message. If you accept,is displayed, and the item is placed in theInbox folder in Messaging. Messages receivedthrough Bluetooth connectivity are indicated by.Remote SIM modeBefore the remote SIM mode can be activated, thetwo devices must be paired and the pairing initiatedfrom the other device. When pairing, use a 16-digitpasscode, and set the other device as authorised. 39 Connections
