Camera53Show icons. To view the active toolbar only when you needit, select Options > Hide icons. Only the capture modeindicator is shown on the display. To activate the activetoolbar, press the scroll key. To hide it again, press thecapture key half way down.Before taking a picture or recording a video, in the activetoolbar, select from the following:to switch between the video and image modesto select the sceneto select the flash mode (images only)to activate the self-timer (images only). See ‘You in thepicture—self-timer’, p. 56.to activate the sequence mode (images only). See ‘Takepictures in a sequence’, p. 56.to select a color effectto show or hide the viewfinder grid (images only)to adjust white balanceto adjust the exposure compensation (images only)to adjust light sensitivity (images only)to adjust contrast (images only)to adjust sharpness (images only)The icons change to reflect the current status of thesetting.The available options vary depending on the capture modeand view you are in.See also active toolbar options in ‘After taking a picture’,p. 53, ‘After recording a video’, p. 58, and ‘Active toolbar’,p. 61 in Gallery.After taking a pictureAfter you take the picture, select the following from theactive toolbar (available only if Show captured image isset to Yes in still image camera settings):• If you do not want to keep the image, select Delete.• To send the image using multimedia, e-mail, Bluetoothconnectivity, infrared, press the call key, or select Send.For more information, see ‘Messaging’, p. 89,‘Bluetooth connectivity’, p. 28. This option is notavailable during an active call.You can also send the image to a call recipient duringan active call. Select Send to caller (only availableduring an active call).• To send the image to a compatible online album, selectSign in for Share online. If you are already signed intoan online service, select Post to (available only if youhave set up an account for a compatible online album).See ‘Share online’, p. 67.