Nokia 1500S User Manual

Nokia 1500S User Manual Manual pdf 18 page image

GB 18Channel searchThe Channel search procedure can be carried out in five different ways.The menu will look different depending on what option you selected in the“Antenna/satellite selection” menu.If you selected “One antenna/one LNB configuration”, select “Automatic”,“Manual” or “Advanced Manual” search, or “Use predefined channels”.If you selected “Multisatellite/DiSEqC switch configuration” or “Motor an-tenna configuration” you also indicate which satellite you wish to search from,using the cursor left/cursor right button.Automatic search/Automatic search for free channelsIf you selected “One antenna/one LNB configuration” or “Multisatellite/DiSEqC switch configuration”:• Press select to start searching for channels.If you selected “Motor antenna configuration”:• Select a predefined channel and then adjust the motor (if necessary) us-ing the cursor left/cursor right button.• Press select to start searching for channels.Manual searchThe information that must be entered in this menu is available in satellite TVmagazines or on the Internet.Transponder frequency: Specify the frequency in MHz using the numericbuttons. If you enter the wrong value, erase using cursor left.Polarisation: Select Horizontal, Vertical, Circular left or Circular right.Symbol rate: Enter using the numeric buttons. If you enter the wrong value,erase using cursor left.Network search: Select “Yes” if you want to search all transponders that areconnected to a specific network.Adjust motor: This alternative is only visible if you have set the motor an-tenna configuration. If necessary, adjust the motor for the current satellite.• Press select to start searching for channels.Video, Audio and PCR PIDThese alternatives are only available if you are searching from a user-definedsatellite. By entering these values you can see a TV picture on the screenwhich may help you to adjust the dish.Remove limitsIf you need to remove the limits.When you activate this command, the motor will turn itself to the 0∞ (Zero) posi-tion.However, the next time you select a channel, the motor will turn to its properposition.First time installation