GB 3Connecting a TV and a VCRQuick guidePreparing theRemote ControlSee pages 13 and 14 if you want to connect to an analoguesatellite receiver or connect in any other way.• Plug in your Mediamaster.• The ”First time installation” menu is shown.• Press the select button on the remote control to start the installation proce-dure.Switching on for the first timeLanguage• Select the desired language from the menu using the cursor up/cursor downbuttons.This will also become the main language for audio and subtitling.• Press select to continue.Antenna/satellite selectionThis Quick guide describes connection to the most common satellite dish in-stallations that have one (1) Universal LNB.• Select the ”One antenna/one LNB configuration” alternative.• Press select to continue.If you have two or more LNBs connected to your satellite dish, see page 16.Satellite dishThe satellite dish must have an unobstructed path to the satel-lites.Install the satellite dish according to the instructions.If you already have a satellite dish installed, note that you willneed a Universal LNB which works on the frequencies 10.70-12.75 GHz to be able to handle digital signals.x1 2312Antenna RFTVVideoSCARTSatellite dishSCART