GB 4Time adjustmentThe time is adjusted using the cursor up/cursor down buttons,± half an hour at a time. You can also change the minutes using the cursor left/cursor right buttons.• Press select to finish the first-time installation and to open the Navi Bars.Channel search in progressThis menu will be shown while the Mediamaster is searching for TV and radiochannels.All channels that are found will be listed on the screen.Please note that the search procedure may take a few minutes. You can cancellthe search at any time by pressing select.When the search procedure has ended, a message will tell you how many TV andradio channels have been found.• Press select to continue.Channel search• Select the “Automatic search” alternative. Note that you can also choose tosearch only for free channels by selecting the “Automatic search for free chan-nels” alternative.• Press select to start the channel search. Note that you can choose to skip thechannel search and select “Predefined channels”. This alternative allows youto use only a few predefined channels that have been stored in theMediamaster at the factory.One antenna/one LNB configurationSelect this alternative if you have one (1) LNB mounted on the antenna.• Press opt to view the predefined channel.LNB typeSelect the correct LNB type for your configuration. The most common values,including Universal LNB, can be selected using the cursor left/cursor right button .LNB offset voltageIf the cable from the antenna is very long, the voltage at the LNB could be toolow to change the polarisation. You can increase the voltage to the LNB by 0.5V.SatelliteSelect one of the pre-programmed satellites.Predefined channelSelect one of the predefined channels and adjust the antenna until a TV picturefrom the predefined channel is visible in the background.• Press select to confirm all settings and then carry out the channel search pro-cedure.Quick guide