M e s s a g e s37FCC DRAFTAutomate voice mailYou can insert special characters called dialing codes into phone numbers suchas voice mail, and save the number to a 1-touch dialing location. Dialing codesinstruct the receiving system to pause, wait, bypass, or accept the numbers thatfollow them in the dialing string.Note: Voice mail services vary by service provider. The followinginstructions are examples of common operations. Please check withyour service provider for specific instructions for using your voice mailservice.Write down voice mailbox number and process1. Write down your voice mailbox number.2. Call and check your voice mail as you normally would.3. Write down your interaction with the recorded prompts step-by-step. Keep inmind that each voice mail service may vary. However, it should looksomething like this:Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234,press #.Be precise; you will need this information in "Setup voice mail with dialingcodes," p. 37.Insert dialing codesPress * repeatedly to cycle through dialing codes. Once the desired code appearsin the display, pause briefly and the code is inserted into the dialing string.The following dialing codes are available:*—Bypasses a set of instructions.p—Pauses for 2.5 seconds before sending any numbers that follow.w—Waits for you to press the call key before sending the numbers or codes thatfollow.Setup voice mail with dialing codes1. In the standby mode, select Menu > Contacts > Speed dial.2. Scroll to an empty 1-touch dialing slot and select Assign.3. Enter your voice mailbox number, including the area code.