S e t t i n g s62 FCC DRAFT• Select Delete to erase the voice command.■ Time and date settingsTimeShow/hide the clockIn the standby mode, select Menu > Settings > Time and date settings > Clock >Show clock or Hide clock.Set the time1. In the standby mode, select Menu > Settings > Time and date settings >Clock > Set the time.2. Enter the time (in hh:mm format), and select OK.3. Select am or pm if 12-hour format is used.Change the formatIn the standby mode, select Menu > Settings > Time and date settings > Clock >Time format > 24-hour or 12-hour.DateShow/hide the dateIn the standby mode, select Menu > Settings > Time and date settings > Date >Show date or Hide date.Set the date1. In the standby mode, select Menu > Settings > Time and date settings >Date > Set the date.2. Enter the date, and select OK.Change the date format1. In the standby mode, select Menu > Settings > Time and date settings > Date.2. Select Date separator.3. Select a separator of your choice.4. Select Date format.5. Select the format of your choice.