C o n t a c t s43FCC DRAFTIf you selected Add number, select General, Mobile, Home, Work, or Fax.If you selected Add detail, select E-mail address, Web address, Street address,or Note.3. Enter the number or text for the type you have selected, and select OK.4. To change a number type (General, Mobile, Home, Work, or Fax), selectChange type in the options list.You can also change which phone number is the default number for the contactentry.1. In the standby mode, scroll down to the number you wish to change, andselect Details.2. Scroll to the number you wish to set as default, and select Options > Set asdefault.Voice dialingYou can dial up to 25 stored numbers using voice dialing (voice tags).Before using voice tags, note that:• Voice tags are not language dependent. They are dependent on the speaker’svoice.• You must say the name exactly as you said it when you recorded it.• Voice tags are sensitive to background noise. Record voice tags and use themin a quiet environment.• Very short names are not accepted. Use long names and avoid similar namesfor different numbers.Note: Using voice tags may be difficult in a noisy environment or duringan emergency, so you should not rely solely upon voice dialing in allcircumstances.Assign a voice tag to an entryBefore you can use voice dialing, you must first assign a voice tag to the number.1. In the standby mode, scroll down to enter the contacts list.2. Highlight the contact you want to assign a voice tag, select Details >Options > Add voice tag > Start.3. Speak clearly into the microphone.