[ 104 ]• Default profile—Choose the profile you wish to be automaticallyactivated when your phone is connected to a car kit. You can selectanother profile while this accessory is connected.• Automatic answer—Calls are answered automatically after five secondswhen a car kit is connected. Scroll to On or Off and press Select.• Lights—Choose to keep the phone lights always on, or to shut offautomatically after several seconds. Scroll to On or Automatic andpress Select.IF YOU SELECTED LOOPSETThe following profiles are available. Scroll to the option of your choice andpress Select to enter the option’s submenu and modify its settings.• Use loopset—Enable use of the LPS-4 mobile inductive loopset.Scroll to Yes or No and press Select.• Default profile—Choose the profile you wish to be automaticallyactivated when a loopset is connected. You can select another profilewhile this accessory is connected.• Automatic answer—Calls are answered automatically after five secondswhen a loopset is connected. Scroll to On or Off and press Select.Security settingsFor information on PIN code request, Call restrictions, Fixed dialing, andother security features, see “Manage phone security” on page 40.Restore factory settingsYou can reset some of the menu settings to their original values.1 At the Start screen, press Menu 4-8 (Settings > Restore factorysettings). After a brief pause, you’re prompted to enter thesecurity code.2 Enter the security code (the default is 12345) and press OK.A message appears in the display confirming your originalsettings have been restored.Note: Any data that you have entered, such as names andnumbers in your Phone book will not be deleted.
