C o n t a c t s35Change speed dials numbers1. In standby mode, select Menu >Contacts > Speed dials.2. Scroll to the speed dials entry youwant to change, and selectOptions > Change.3. Enter the new number and a namefor the entry, or select Search toretrieve a number from thecontacts list; select Select.Delete speed dials numbers1. In standby mode, select Menu >Contacts > Speed dials.2. Scroll to the speed dials entry youwant to delete, and selectOptions > Delete > Yes.■ Voice tagsYou can dial up to 25 stored numbersusing voice dialling.Before using voice tags, note thefollowing:• Voice tags are not language-dependent. They depend on thespeaker’s voice.• You must say the name exactly asyou said it when you recorded it.• Voice tags are sensitive tobackground noise. Record voicetags, and use them in a quietenvironment.• Very short names are not accepted.Use long names and avoid similarnames for different numbers.Note: Using voice tags may bedifficult in a noisyenvironment or during anemergency, so you should notrely on voice dialling in allcircumstances.Assign a voice tag toan entryBefore you can use voice dialling,you must first assign a voice tag to thenumber.1. In standby mode, scroll to the entryin your contacts list to which youwant to assign a voice tag.2. Select Details > Options >Add voice tag > Start.3. Speak clearly into the microphone.Do not select Quit unless you wantto cancel the recording. The deviceautomatically stops recording, andsaves and replays the voice tag.appears next to commands thathave voice tags assigned.9243644_6155_en_au.fm Page 35 Wednesday, December 28, 2005 11:28 AM