S e t t i n g s53Open fold to answerBy default, your phone answers anincoming call when you open the fold.You can change the default setting soyour phone does not answer calls withthe fold open. In standby mode, selectMenu > Settings > Call > Answerwhen fold is opened > On or Off.Calling cardIf you use a calling card for longdistance calls, you can save the callingcard numbers in your device. Yourdevice can store up to four callingcards. Contact your calling cardcompany for more information.Save information1. In standby mode, select Menu >Settings > Call > Calling card.2. Enter your lock code, and select OK.See “Change lock code”, p. 61.3. Scroll to one of the four cardmemory locations, and selectOptions > Edit > Dialling sequenceand one of the following sequencetypes:Access no.+ phone no.+ card no.—Dial the access number, the phonenumber, then the card number (andthe PIN, if required).Access no.+ card no.+ phone no.—Dial the access number, the cardnumber (and the PIN, if required),then the phone number.Prefix+ phone no.+ card no.—Dialthe prefix (numbers that mustprecede the phone number) andphone number you want to dial,then the card number (and the PIN,if required).4. Enter the required information(access number or prefix and cardnumber), and select OK to confirmyour entries.5. Select Card name, enter the cardname, and select OK.Make callsAfter you have saved your calling cardinformation in your device, you canmake a call using your calling card.9243644_6155_en_au.fm Page 53 Wednesday, December 28, 2005 11:28 AM
