P h o n e a t a g l a n c e13■ Lock code security settingsYour device has a security option allowing you to lock your phone with a code.When the code is set and turned on, no outgoing calls are allowed and the menucannot be accessed without entering the correct code first. This preventsunauthorized outgoing calls or access to any information stored on your device.The Security option is in the Settings menu. The first time you access the Securityoption, you must enter a lock code. The default lock code may vary depending onyour wireless service provider. The preset lock code may be the last four digits ofyour phone number, 1234 or 0000. If none of these work, contact your wirelessservice provider for help.You must enter the lock code to access the following Security option:1. In the standby mode, select Menu > Settings > Security.2. Enter the lock code, and select OK. See "Change lock code," p. 68.■ Go to functionsThe Go to menu enables you to change the function of the left selection key onyour phone. With this function, you can quickly access your most frequently usedfunctions from the Go to menu in the standby mode.Choose Go to functions1. In the standby mode, select Go to > Options > Select options.2. Scroll up or down to highlight the desired function.3. Select Mark to add a function or Unmark to remove a function.4. Select Done when you have added all desired functions.5. Select Yes to save the changes.6. In the standby mode, select Go to to display a list of the functions youselected in step 2.Organize functions1. In the standby mode, select Go to > Options > Organize.2. Scroll up or down to highlight the function you want to rearrange, and selectMove > Move up, Move down, Move to top, or Move to bottom.3. Select Done > Yes to save the changes.
