S e t t i n g s613. Scroll to one of the four card memory locations, and select Options > Edit >Dialing sequence and one of the following sequence types:Access no.+ phone no.+ card no.—Dial the access number, the phone number,then the card number (and the PIN, if required).Access no.+ card no.+ phone no.—Dial the access number, the card number(and the PIN, if required), then the phone number.Prefix+ phone no.+ card no.—Dial the prefix (numbers that must precede thephone number) and phone number you want to dial, then the card number(and the PIN, if required).4. Enter the required information (access number or prefix and card number),and select OK to confirm your entries.5. Select Card name, enter the card name, and select OK.Make callsAfter you have saved your calling card information in your device, you can make acall using your calling card.1. In the standby mode, select Menu > Settings > Call > Calling card.2. Enter your lock code, and select OK. See "Change lock code," p. 68.3. Select your desired calling card.4. Press the end key to return to the standby mode; then enter the phonenumber, including any prefix (such as 0 or 1) that your calling card mayrequire when you make a calling card call. See your calling card forinstructions5. Press and hold the call key for a few seconds until Card call is displayed.6. When you hear the tone or system message, select OK.Data or fax callsData and fax calling is a network service. See "Network services," p. 5. If yournetwork operator supports this feature, you can set up the device to send orreceive data and fax calls with a terminal, such as a PDA or PC, connected.For better performance during data calls, place the device on a stationarysurface. Do not move the device or hold it in your hand during a data call.For more information on connectivity, refer to the PC/PDA Connectivity Guidewhich can be downloaded from the Nokia website at http://www.nokia.com/us.1. In the standby mode, select Menu > Settings > Call > Data/fax calls >Incoming data/fax call and one of the following options:Normal—The device receives incoming calls as usual.
