M e s s a g e s34Reply to multimedia messageSelect Reply or Reply to all to enter a reply and send it to the original sender andany other message recipients.■ Voice messagesIf you subscribe to voice mail, your network operator will furnish you with a voicemailbox number. You need to save this number to your device to use voice mail.When you receive a voice message, your device beeps, displays a message, or both.If you receive more than one voice message, your device shows the number ofvoice messages received.Save voice mailbox numberYour network operator may have already saved your voice mailbox number toyour device. Select OK to leave the number unchanged.1. In the standby mode, select Menu > Messages > Voice messages > Voicemailbox number. The voice mailbox number is displayed.2. If the box is empty, enter the voice mailbox area code and number, andselect OK.Call and setup voice mail1. After you save the voice mailbox number, in the standby mode, press and hold 1.2. When you connect to voice mail and the prerecorded greeting begins, followthe automated instructions to setup voice mail.Listen to voice messagesAfter you set up voice mail, in the standby mode, press and hold 1; or selectMenu > Messages > Voice messages > Listen to voice messages to dial the voicemailbox number. When you connect and the prerecorded greeting begins, followthe automated instructions to listen to your voice messages.Automate voice mailYou can insert special characters called dialing codes into phone numbers suchas voice mail, and save the number to a 1-touch dialing location. Dialing codesinstruct the receiving system to pause, wait, bypass, or accept the numbers thatfollow them in the dialing string. See "Phone numbers with dialing codes," p. 35.Voice mail services vary by network operator. The following instructions areexamples of common operations. Please check with your network operator forspecific instructions on using your voice mail service.
