S e t t i n g s65Connection indicator• When is shown continuously, the IR connection is activated and yourphone is ready to send or receive data using its IR port.• When blinks, your phone is trying to connect to the other device or aconnection has been lost.■ Voice commands and voice tagsBefore using voice tags, note the following:• Voice tags are not language-dependent, but depend on the speaker’s voice.• You must say the name exactly as you said it when you recorded it.• Voice tags are sensitive to background noise. Record voice tags, and use themin a quiet environment.• Very short names are not accepted. Use long names, and avoid similar namesfor different numbers.Note: Using voice tags may be difficult in a noisy environment or duringan emergency, so you should not rely on voice dialing in all circumstances.Hands-free operationYou can set as many as 16 voice commands to enable hands-free operation ofcertain features in your device.Assign a voice tag to a commandBefore using voice commands, you must first add a voice tag to the device function.1. In the standby mode, select Menu > Settings > Voice commands.2. Select the device function you want to tag: Profiles, Voice mailbox, Radio,Infrared, Voice recorder or Call log.3. If necessary, select an option associated with that function.4. Select Start, and speak the voice tag clearly into the microphone. Do notselect Quit unless you want to cancel the recording.The device replays and saves the recorded tag. appears next to commandswith voice tags assigned.Activate a voice commandAfter you have associated a voice tag with a function in your device, to issue acommand, speak the voice tag.1. In the standby mode, press and hold the right selection key or voice key.
