Nokia 6236i User Manual

Also see for 6236i: User guide Troubleshooting guide Disassembly/Assembly Antenna Description and Troubleshooting Baseband Description and Troubleshooting

Contents

Nokia 6236i User Manual Manual pdf 41 page image

C o n t a c t s40Set up voice tagsFor information on setting up voice tags and other voice features, see "Voicecommands," p. 65.Caller groupsYou can add contacts list entries to any of five caller groups, and then assign aunique ringer tone or graphic to that group. This enables you to identify callersfrom the group by their unique ringer tone or graphic.1. Scroll to a name in your contacts list you would like to add to a caller group,and select Details.2. Select Options > Caller groups > Family, VIP, Friends, Business, or Other.3. Select Options to display the following caller group options:Rename group—Rename the group to your preference.Group ringing tone—Set the ringer tone for the group. For individual contactsin the group, the group tone sounds even if another tone was assigned tothat individual.Group logo—Turn the graphic for the caller group On or Off, or View the graphic.Group members—Add or remove members from the caller group.Set up 1-touch dialingYou can associate any entry in the contacts list with a key from 2–9; then dialthose entries by pressing and holding the assigned key. See "1-touch dialing,"p. 61, to activate or deactivate 1-touch dialing.Assign a key to 1-touch dialing1. In the standby mode, select Menu > Contacts > 1-touch dialing.2. Scroll to an (empty) 1-touch dialing slot, and select Assign.3. Enter the number (including the area code), and select OK; or select Search toretrieve a number from the contacts list.4. Enter a name for the number, and select OK.If 1-touch dialing is off, the device displays a prompt asking if you would liketo turn 1-touch dialing on.5. Select Yes to activate 1-touch dialing.Change 1-touch dialing numbers1. In the standby mode, select Names > 1-touch dialing.2. Scroll to the 1-touch dialing entry you wish to change, and selectOptions > Change.