Nokia 6600 User Guide 8 Copyright © 2004 NokiaIF THE PHONE REQUESTS A LOCK CODE:• Key in the lock code (displayed as *****) and press .The factory setting for the lock code is 12345. For more information on the accesscodes, see the ’Tools’ chapter.Setting the time and dateUse the number keys - to key in first the current time and then thedate. Press to accept the settings.• STANDBY MODEThe indicators described below are shown when thephone is ready for use, with no characters keyed in.In this state, the phone is in ‘standby mode’.A Shows the signal strength of the cellular networkat your current location. The higher the bar, thestronger the signal. The antenna symbol isreplaced with the GPRS symbol when GPRSconnection has been set to When available and aconnection is available in the network or in thecurrent cell. See “Packet data (General PacketRadio Service, GPRS)” on page 67 and “GPRS” onpage 70.B Shows an analog or a digital clock. See “Date and time” on page 71.C Indicates in which cellular network the phone is currently being used.D Shows the battery charge level. The higher the bar, the more power left inthe battery.E Navigation bar: shows the currently active profile. If the selected profile is Normal,the current date is displayed instead of the profile name. “Navigation bar - movinghorizontally” on page 11.F Shows the current shortcuts assigned for the selection keys and .G Background image: You can select any image to be used as a background imagein standby mode. See “Themes” on page 80.Your phone has a screen saver. If there are no actions for one minute, the displayis cleared and a screen saver becomes visible. To deactivate the screen saver, pressany key. See “Themes” on page 80.
