104Copyright © 2003 Nokia. All rights reserved.If you select Memory, the security code is requested when the memory in use isSIM card and you want to change the memory to Phone or Phone and SIM orcopy names and numbers from one phone book to another. See also Memory inuse under Selecting the phone book settings on page 79.When you change this setting, the numbers in the menus Missed calls,Received calls and Dialled numbers are deleted.• Access codes to change the security code, PIN code, PIN2 code, barringpassword or UPIN code. The codes can only include numbers from 0 to 9.Restoring factory settingsYou can reset some of the menu settings to their original values.Press Menu in standby mode, and select Settings and Restore factory settings. Keyin the security code and press OK. Note that this function does not delete theinformation you have saved or downloaded to the phone.■ Camera (Menu 6)In this menu, you can start the phone’s camera and adjust its settings.Note: Your phone must be switched on to use this function. Do notswitch the phone on when wireless phone use is prohibited or when it may causeinterference or danger.To access this menu: Press Menu in standby mode and select Camera.
