Tools88Summary after call—Activate this setting if you want thephone to briefly display the approximate duration of thelast call.1-touch dialing—Select On, and to dial the numbersassigned to the speed dialing keys (2–9), press andholding the key. See also "1-touch dialing," p. 19.Anykey answer—Select On, and to answer an incomingcall, briefly press any key, except the left and rightselection keys, the power key, and the end key.Line in use (network service)—This setting is shown onlyif the SIM card supports two subscriber numbers; that is,two phone lines. Select which phone line you want to usefor making calls and sending text messages. Calls on bothlines can be answered irrespective of the selected line. Ifyou select Line 2 and have not subscribed to this networkservice, you will not be able to make calls. When line 2 isselected, 2 is shown in the standby mode.Tip! To switch between the phone lines, press andhold # in the standby mode.Line change (network service)—To prevent line selection,select Line change > Disable if supported by the SIMcard. To change this setting, you need the PIN2 code.Connection settingsData connections and access pointsYour phone supports packet data connections ( ), such asgeneral packet radio service (GPRS) in the GSM network.GPRS uses packet data technology where information issent in short packets of data over the mobile network.To establish a data connection, an access point is required.You can define different kinds of access points:• MMS access point to send and receive multimediamessages• Access point for the Web application to view WML orXHTML pages• Internet access point (IAP) to send and receive e-mailCheck the kind of an access point you need with yourservice provider for the service you wish to access. Foravailability and subscription to packet data connectionservices, contact your network operator or service provider.