[ 135 ]Menu functionsSEND AND RECEIVE DATA1 Ensure that the IR ports ofthe sending and receivingdevices are pointing at eachother and that there are noobstructions between thedevices.The preferable distancebetween the two devicesin an IR connection is from3 inches to 3 feet.2 Activate IR in your phone byselecting Connectivity >Infrared from the menus.3 The user of the other deviceshould activate IR as well.If data transfer is not started within two minutes after the activation ofthe IR port, the connection is cancelled and must be restarted.CONNECTION INDICATOR• When is shown continuously, the IR connection is activated andyour phone is ready to send or receive data using its IR port.• When blinks, your phone is trying to connect to the other deviceor a connection has been lost.• GPRS, HSCSD, CSDWith your phone you can use general packet radio service (GPRS),high-speed circuit switched data (HSCSD), and circuit switcheddata (CSD).GPRS is a technology used to send and receive data using short bursts orpackets over the wireless network. With GPRS, you can stay connected tothe Internet and allow for faster downloads without completing a dial-upconnection. Applications using GPRS include the browser, text messagingand dial-up connections for making digital data calls3-ft maximumdistance
