[ 41 ]Phone securitySecurity codeThe security code controls access to features such as the security level andis supplied with the phone. The preset code is 12345.Note: If you enter the wrong security code five times in succession,you will not be able to enter a code for five minutes, even if youpower off the phone between incorrect entries.Once you change the security code from its preset of 12345, keep the newcode secret and in a safe place separate from your phone. Use thisprocedure to change your security code.1 From the menus, select Settings > Security settings > Access codes >Change security code.After a brief pause, you are prompted to enter the current securitycode (default is 12345).2 Enter the current security code and select OK.You are prompted to enter the new security code.3 Enter the new security code (up to 10 characters) and select OK.You are prompted to reenter the new security code for verification.4 Enter the new security code again and select OK.A message appears in the display confirming your security code hasbeen changed.PIN codeBefore you can change your PIN code, you need to enable PIN coderequest. See “PIN code request” on page 35.1 Select Menu > Settings > Security settings > Access codes >Change PIN code.After a brief pause, you are prompted to enter the current PIN code.2 Enter the PIN code and select OK.You are prompted to enter the new PIN code.3 Enter the new PIN code and select OK.You are prompted to reenter the new PIN code for verification.
