[ 68 ]Call and set up your voice mail1 Once you have saved the voice mailbox number, press and hold the1 key.2 When you connect to voice mail and the prerecorded greeting begins,follow the service’s automated instructions to setup your voice mail.Listen to your voice messagesOnce you have set up voice mail, you can dial the number in one offour ways:• Dial the number using the keypad.• Press and hold the 1 key.• Select Listen if there is a notification message in the display.• Select Menu > Messages > Voice messages > Listen tovoice messages. After a brief pause, your phone dials the voicemail number.Once you connect and the prerecorded greeting begins, follow theautomated instructions to listen to your voice messages.Automate voice mailYou can insert special characters called dialing codes into phone numberssuch as voice mail and then save the number to a 1-touch dialing location.Dialing codes instruct the receiving system to pause, wait, bypass, oraccept the numbers that follow them in the dialing string.Note: Each voice mail service can vary. The examples and stepsthat follow are for clarification. Check with your service providerif you have specific questions about your voice mail service.WRITE DOWN SOME INFORMATIONYou will need this information in “Set up voice mail with dialing codes”on page 69. Be sure to record all of the information correctly.1 Write down your voice mailbox number.2 Call and check your voice mail as you normally would.
