Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual

Also see for 7360 Intelligent Services Access Manager FX Series: Basics, Management and OAM Guide Guide User guide User guide Service manual

Contents

Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual Manual pdf 304 page image

Fiber optic cable management in the7360 ISAM FX-8 shelf304ANSI Hardware Installation Manual3HH-12893-AAAA-TCZZA Issue: 09DRAFT16.2.3 Fiber cablesStandard single-mode fiber cables with LC connectors are connected to the SFPoptical modules for transmit (Tx) and receive (Rx) purposes.The GPON and EPON SFPs require an SC/UPC connector.The NELT-B requires 90° fiber connector strain relief boots.16.2.4 Fiber management kitFiber management guides are recommended for installment on the 7360 ISAM FXshelves to provide proper fiber optic cable handling. The kit contains:• fiber management guide for the NT and NTIO cards• fiber management guide for the LT cardsOne fiber management guide is required for every four LT cards.16.3 Routing fiber optic cablesThis section provides procedures for mounting fiber management guides, routingand connecting fiber optic cables to the NT and LT cards for 7360 ISAM FX-8, andfor installing optical modules.Figure 168 shows the 7360 ISAM FX-8 mounting of the fiber management kit.Note 1 — For an overview of the supported SFP modules, seethe 7360 ISAM FX Product Information Guide.Note 2 — Nokia recommends protecting any SFP cage that isnot equipped with an SFP module, with a dust cover in order toprevent dust intrusion.Note 3 — The type of optical fibers selected must match theparticular SFP to guarantee the overall optical budget in thesystem and it’s correct operation. Loss of optical power as aresult of a mismatch in materials must be avoided.