[ 38 ]To reject a waiting callEither let the phone ring, or press the Quit selection key.To switch between the 2 calls• Press .To end the active callSimply allow the other party to hang up; the call on hold then becomesthe active call. OR:1. Press while in the active call.2. The network will cause the call on hold to call your phone. Answer thisas you would any normal incoming call.• Send own caller ID with next callThis feature allows you to block caller ID when you call someone (yournumber will not be displayed on their caller ID). This feature works ona per-call basis. Contact your service provider for more details.Note: This feature is only effective when calling to a number that isequipped with Caller ID.Note: This feature is available only when supported by the wirelessnetwork, and may not function if you are roaming.For more information on activating and using this service, see “Networkfeature setting” on page 91, and “Send own caller ID when calling” onpage 93.• 3-way conference callsThis network service allows you to talk to two people at the same time.Note: Check with your service provider to make sure this service isavailable in your network.1. Make a call to the first participant as usual.2. When you’re ready to place a call to the third party, enter the numberand press .
