[ 58 ]• Access codesThese codes may only include the characters 0 to 9. The phone promptsyou to enter the current code and the new code. It also prompts you toverify the new code.Note: Avoid using access codes similar to the emergency numbers, suchas 911, to prevent accidental dialling of the emergency number.Security codeYour phone will prompt you for a five digit security code for certain features.These features can be used only after the correct security code has beensuccessfully entered.Note: When entering your security code, ***** will appear on thedisplay to keep others from viewing your code.If you make a mistake entering the code, erase the last entered digit bypressing Clear (or press and hold Clear to delete all the digits on your display).Then enter the correct code or press Back to exit the current feature.If you enter an incorrect security code (Code error will appear) five timesin a row, your phone won’t accept any entries for the next five minutes.Your phone’s default security code is 12345. It’s highly recommendedthat you change this code at once, write it down, and store it in a safeplace away from your phone.Changing your security code1. Press Menu 4-4-2-3 (Settings - Security settings - Access codes -Change security code) and press Select.2. Enter existing (or default) security code and press OK.3. Enter new 5-digit security code and press OK.4. Re-enter your new 5-digit security code for verification, and press OK.5. Phone will display Security code changed.Note: If you have changed your security code and don’t remember thenew code, contact your service provider. Once you have changedyour security code, the default setting is no longer valid.
