[ 43 ]Advanced calling featuresDialing a number using voice dialing1. At the Start screen, press and hold the Names selection key for 2 seconds.A tone is heard and Please speak now is displayed.2. After the tone, clearly speak the voice tag that you recorded previouslyinto the microphone.Note: If the voice tag is not recognized by the phone (or if you failto speak a tag within 3 seconds after the tone), the messageName not recognized will be displayed, and then you are returnedto the Start screen.3. When the voice tag is recognized:• the phone book entry will be displayed on the screen for 3 secondsAND• the voice tag is replayed (via the earpiece).• After 3 seconds, the number is dialed.TIP: When the headset is connected, pressing the headset buttonmomentarily at the Start screen has the same effect as pressingNames for 2 seconds. The alert tones will play through the headset.Speak the voice tag into the headset microphone. The voice tag willplayback through the headset to confirm your choice.Working with an existing voice tagYou can listen to an existing voice tag (in case you forgot what yourecorded), re-record a voice tag, or erase an existing tag.1. At the Start screen, press the Names selection key. Scroll to Voicetags and press the roller.Note: This option displays a list of only those names/numbers thathave been assigned a voice tag.2. Scroll to the phone number whose voice tag you want to edit, thenpress Options.3. Scroll to either Playback, Change, or Erase, and press the roller.Note: If you chose Change, press Start to begin re-recording. The newtag that is recorded replaces the old information.
