Your phoneTransfer is used to connect an incoming call or a call on hold with an active call and todisconnect yourself from both calls.Send DTMF is used to send DTMF tone strings, for example, passwords or bank accountnumbers.Glossary: DTMF tones are the tones you hear when you press the number keys onthe phone keypad. DTMF tones allow you to communicate with voice mailboxes andcomputerised telephony systems, for example.1 Key in the digits with - . Each keystroke generates a DTMF tone, whichis transmitted while the call is active. Press repeatedly to produce: *, p (insertsa pause of approx. two seconds before, or between DTMF characters.), and w (if you usethis character, the remaining sequence is not sent until you press Send again duringthe call). Press to produce #.2 To send the tone, press OK.Tip! You can also store a sequence of DTMF tones for a contact card. When youmake a call to the contact, you can retrieve the sequence. Add DTMF tones to thephone number or DTMF fields in a contact card.Settings for call divertingGo to Menu→Tools→ Call divert.When this network service is activated, you can direct your incoming calls to anothernumber, for example, to your voice mailbox number. For details, contact your serviceprovider.• Select one of the divert options, for example, select If busy to divert voice calls whenyour number is busy or when you reject incoming calls.• Select Options→ Activate to set the divert setting on, Cancel to set the divert settingFig. 3 Options during acall.
