Settings When you open Access points, the list of already available access points opens, see Fig. 4,p. 32. Scroll to the access point you want to edit, and press the joystick.Deleting an access pointIn the list of access points, scroll to the access point you want to remove and selectOptions→ Delete.Access pointsHere you can see a short explanation for every setting that may be needed for differentdata connections and access points.Note: Start to fill in the settings from the top because depending on what dataconnection you select (Data bearer) or whether you need to insert a Gateway IPaddress, only certain setting fields are available.Note: Follow any instructions given to you by your service provider.• Connection name - Give a descriptive name for the connection.Tip! See also‘Settings needed formultimedia messaging’, p.67, ‘Settings needed fore-mail’, p. 69, and‘Setting up the phone forWAP services’, p. 103.• Data bearer - The options are GSM data, High speed GSM, and GPRS. Depending on whatdata connection you select, only certain setting fields are available. Fill in all fieldsmarked with Must be defined or with a red asterisk ( ). Other fields can be left empty,unless you have been instructed otherwise by your service provider.Note: To be able to use a data connection, the network service provider mustsupport this feature, and if necessary, activate it for your SIM card.• Access point name (for packet data only) - The access point name is needed to establisha connection to the GPRS network. You obtain the access point name from yournetwork operator or service provider.Fig. 4 A list of accesspoints using differentdata connections.
